Lifting Electromagnet for Bundled Rebar and Profiled Steel
Hunan Kemeida Electric Co., Ltd.- Normal Temperature of Material：Below 150°c
- High Temperature of Material：150°c-600°c
- Super High Temperature of Material：Above 600°c
- Rated Voltage：DC220V
- Transport Package：Export Wooden Case
- Specification：CE
Base Info
- Model NO.：MW18-10080L,1
- Trademark：KMD
- Origin：Yueyang, Hunan
- HS Code：8505901000
- Production Capacity：5000PCS,Year
Description
bundles length=12m, diameter ≤φ250mm, weight≤2t4 3 MW18-11070L/1 8 36.5 4 MW18-14070L/1 10 45.6 5 MW18-17070L/1 12.3 56 6 MW18-11080L/1 8.35 38 bundles length=12m, diameter≤ φ300mm, weight≤3t 3 MW18-14080L/1 10.8 48.5 4 MW18-17080L 13.1 59.5 5
Complete lifting System:
Guide for Model Selection
1,What's the attached material? Choose the suitable series according to the attached material.
2,The specification of material attracted? such as weight,length,width or number.
3,The specification of hoist, such as: tonnage, height and brake type of hook.
4,The application environment, such as temperature of material attached, indoor or outdoor.
5,The cycle duty: when exceed 60%, choose high frequency type.
6, Selection of corollary equipment: cable reel and control cabinet.
Advantage:
MW18 series have good advantages in heat dispersion, penetration, and can lift and transport bar material, flat iron and angle iron in unpacked or simple packed situation. There are two kinds: normal & high temperature type. Normally multiple units are used in operation, so two or four connection points are used for linking hanging beam. We strongly hope that clients choose KMD magnet liftings as of good quality and service. We have been in this industry over 23 years with massive trusty from old clients.
KMD Introduction:
Established year: 1997
Staffs: 800
Engineer team: 180
Exported countries: 50, including India, Pakistan, Malaysia, Vietnam, Myanmar, Laos, Phillipines, Indonesia, USA, Spain, Turkey, Russia, Ukrain, Saudi Arabia, etc.
Certifications: CE, ISO9001, ISA
Complete lifting System:
Guide for Model Selection
1,What's the attached material? Choose the suitable series according to the attached material.
2,The specification of material attracted? such as weight,length,width or number.
3,The specification of hoist, such as: tonnage, height and brake type of hook.
4,The application environment, such as temperature of material attached, indoor or outdoor.
5,The cycle duty: when exceed 60%, choose high frequency type.
6, Selection of corollary equipment: cable reel and control cabinet.
Advantage:
MW18 series have good advantages in heat dispersion, penetration, and can lift and transport bar material, flat iron and angle iron in unpacked or simple packed situation. There are two kinds: normal & high temperature type. Normally multiple units are used in operation, so two or four connection points are used for linking hanging beam. We strongly hope that clients choose KMD magnet liftings as of good quality and service. We have been in this industry over 23 years with massive trusty from old clients.
KMD Introduction:
Established year: 1997
Staffs: 800
Engineer team: 180
Exported countries: 50, including India, Pakistan, Malaysia, Vietnam, Myanmar, Laos, Phillipines, Indonesia, USA, Spain, Turkey, Russia, Ukrain, Saudi Arabia, etc.
Certifications: CE, ISO9001, ISA